Mural artists are some of the most popular types of artists today. These artists specialize in the application of works of art on large surfaces like walls and ceilings. Their work can be done indoors or outdoors for the entire public to see. As such, they somehow provide the public with access to fine art. People who cannot afford to go to art galleries get a chance to see fine art in the streets. When in need of School murals paintings Texas should be visited.
Muralists employ a wide variety of techniques in their work. The techniques that they use have gotten better over the years because of better technology leading to more inventions. For instance, back in the ancient days, some types of murals were attached onto surfaces using eggs, cement, and flour among other materials as adhesives. Today, such materials are not used to stick works of art on surfaces.
Mural work normally starts with the preparation of the surface that artwork is supposed to be done on. The preparation process is dependent of the kind of surface, technique that will be used, and also the artwork that one wishes to produce. Preparations ought to begin with cleaning the surface, correcting or eliminating any blemishes such as moisture damage and cracks.
Cracks on a surface shows that the surface has more serious problems in its structure which might affect the artwork in future. Proper checking of the wall should be done to determine if there is any oil, wax, mold or dirt. One should thoroughly clean the surface if it has any of these materials. If the real cause for mold or mildew is not corrected, the materials will still return even if they are cleaned thoroughly during preparation.
The next step ought to be priming the surface properly. The purpose of priming is to increase cohesion between the surface and the paint. Sometimes the primer is applied on existing paint and the job turns out just fine. However, to achieve the best results and also ensure longevity, old paint ought to be removed completely. This decision is for the artist to make.
A sanding block can be used to remove the old paint. One should ensure the surface has dried completely after cleaning before a primer is applied. For best results to be achieved, the primer to be used should be of high quality. Plastering the surface so as to add some texture can help the artist to achieve some effect in the artwork.
Once the surface is ready, painting should be started. First, the artist has to transfer their work to the surface by either using a projector or the grid method. Thereafter, the underpainting job can be done. Underpainting is where large blocks of color are applied to the surface leaving finer details to be applied later.
Different effects in the art can be achieved using various techniques. Using the sponging method is an example of techniques that can be used. One can create depth and texture among other effects using sponging technique. Glazing, stippling, stenciling and antiquing are some of the other techniques available for use.
Muralists employ a wide variety of techniques in their work. The techniques that they use have gotten better over the years because of better technology leading to more inventions. For instance, back in the ancient days, some types of murals were attached onto surfaces using eggs, cement, and flour among other materials as adhesives. Today, such materials are not used to stick works of art on surfaces.
Mural work normally starts with the preparation of the surface that artwork is supposed to be done on. The preparation process is dependent of the kind of surface, technique that will be used, and also the artwork that one wishes to produce. Preparations ought to begin with cleaning the surface, correcting or eliminating any blemishes such as moisture damage and cracks.
Cracks on a surface shows that the surface has more serious problems in its structure which might affect the artwork in future. Proper checking of the wall should be done to determine if there is any oil, wax, mold or dirt. One should thoroughly clean the surface if it has any of these materials. If the real cause for mold or mildew is not corrected, the materials will still return even if they are cleaned thoroughly during preparation.
The next step ought to be priming the surface properly. The purpose of priming is to increase cohesion between the surface and the paint. Sometimes the primer is applied on existing paint and the job turns out just fine. However, to achieve the best results and also ensure longevity, old paint ought to be removed completely. This decision is for the artist to make.
A sanding block can be used to remove the old paint. One should ensure the surface has dried completely after cleaning before a primer is applied. For best results to be achieved, the primer to be used should be of high quality. Plastering the surface so as to add some texture can help the artist to achieve some effect in the artwork.
Once the surface is ready, painting should be started. First, the artist has to transfer their work to the surface by either using a projector or the grid method. Thereafter, the underpainting job can be done. Underpainting is where large blocks of color are applied to the surface leaving finer details to be applied later.
Different effects in the art can be achieved using various techniques. Using the sponging method is an example of techniques that can be used. One can create depth and texture among other effects using sponging technique. Glazing, stippling, stenciling and antiquing are some of the other techniques available for use.
About the Author:
To see the collection of our school murals paintings Texas is the right place to come to. Take a quick tour of the online page now at http://www.graffixx.com/custom-mural-services.html.
No comments:
Post a Comment